Announcement

Collapse
No announcement yet.

5.4 l SOHC engine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • stubbie
    replied
    Has anyone seen a Barra Engine built by Ford Australia. There is a 6 cylinder Turbo (not sure on these figures as they seem to change wherever you read) 325Kw 576Nm and the 5.4LTR V8 345Kw at 570Nm. The V8 would be way to wide I think but the 6 might fit in. Just.

    Leave a comment:


  • jhuebner
    replied
    For now its covered on a stand thanks for the info, as long as the FE holds on I will too, but it would be cool to have it installed

    Leave a comment:


  • Ford351c594
    replied
    if you are still looking to do this. That is a very wide motor. I would check that. Also look a Ford Motor sport, ( now Ford Racing again) they probably make a stand alone kit for it. PCM and minimal wiring harness to make it run. They have been increasing the out put of these lately. The new 5.0 already has it all already.....

    Leave a comment:


  • jhuebner
    replied
    Now have the complete drivtrain in the garage, just going to save it for a hotrod or ratrod project, about to pull the 390 and replace all the gaskets a few questions in another post about the removal

    Leave a comment:


  • Yadkin
    replied
    Those engines are good for 250k miles, then they start to pop spark plugs off the heads, casting threads and all!

    Leave a comment:


  • FINSRIN
    replied
    Thatz a low buck price !
    Wiring, controllers, etc for swaps are now available after market.

    Leave a comment:


  • simplyconnected
    replied
    I'm with Joe... get the computer and keep the electronic fuel injection system.

    Leave a comment:


  • jhuebner
    replied
    The guy said I can have the complete drive train, I did a test drive engine and trans pull hard the rest of the vehicle is trashed.

    Leave a comment:


  • Joe Johnston
    replied
    Get the wiring, fuel pump, computer too!!!

    Leave a comment:


  • jhuebner
    started a topic 5.4 l SOHC engine

    5.4 l SOHC engine

    Hey guys I can pick up a complete running 5.4l sohc engine with trans for $300, from a 99 Lincoln Navigator anyone know or heard of anyone swapping this engine in a T Bird, sure I will change the intake to a Edelbrock Victor........
Working...
X
Warning: include(test.php): failed to open stream: No such file or directory in /home/squar229/public_html/vbulletin/index.php on line 78 Warning: include(test.php): failed to open stream: No such file or directory in /home/squar229/public_html/vbulletin/index.php on line 78 Warning: include(): Failed opening 'test.php' for inclusion (include_path='.:/opt/cpanel/ea-php72/root/usr/share/pear') in /home/squar229/public_html/vbulletin/index.php on line 78