Announcement

Collapse
No announcement yet.

SWAP! Trade for 59 T-Bird PWR Window Motor/Regulator

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SWAP! Trade for 59 T-Bird PWR Window Motor/Regulator

    I need a complete 430 engine A/C compressor mounting plate and the brackets for my 1959 T-Bird. I want the original cast one.

    I have 3 power window motors complete with the couplers and mounted to the regulators. They are all 4 wire. I have 2 # B9SB-6323201-A and 1 # B9SB-6323200-A.

    I also have many other EDG and a few EDJ engine parts. I don't wish to sell them so please don't ask. I only want to trade ONE power window motor-regulator for an air conditioning compressor mounting plate and hardware.

    I have a plate that works but it's not stock and from a 1961 T-Bird made from mild steel and welded together. I want an original. If you have one, email me and let me know what you need and I will send you a photo and description of the part if I have what you need.

    Thanks,

    Dave

    aka
    J-Bird

    david@rhynerXcom replace the X with a .

  • #2
    RE: Parts found. Thanks!

    I found the mounting plate and brackets all nicely powder coated along with all the correct pulleys.


    >I need a complete 430 engine A/C compressor mounting plate
    >and the brackets for my 1959 T-Bird. I want the original
    >cast one.
    >
    >I have 3 power window motors complete with the couplers and
    >mounted to the regulators. They are all 4 wire. I have 2 #
    >B9SB-6323201-A and 1 # B9SB-6323200-A.
    >
    >I also have many other EDG and a few EDJ engine parts. I
    >don't wish to sell them so please don't ask. I only want to
    >trade ONE power window motor-regulator for an air
    >conditioning compressor mounting plate and hardware.
    >
    >I have a plate that works but it's not stock and from a 1961
    >T-Bird made from mild steel and welded together. I want an
    >original. If you have one, email me and let me know what you
    >need and I will send you a photo and description of the part
    >if I have what you need.
    >
    >Thanks,
    >
    >Dave
    >
    >aka
    >J-Bird
    >
    >david@rhynerXcom replace the X with a .

    Comment

    Working...
    X