1964 insterment panel

[Larry Tappen]

I'm installing my insterment panel that the p.o. left disassembled. My questions are: 1, dose all the wiring (light bulbs etc.) route through the plastic clips on the back of the panel? 2, are the longer bulb sockets for the gages and not the speedo numbers? Thanks for the help, Larry.

[stubbie]

Speedo I'm pretty sure are small black sockets, so that would leave the long ones for the gauges. This is a pic looking at the rear of a 64 dash. Hope it makes sense.

[Larry Tappen]

Stubbie, thanks for the info. I'm putting the cluster back in so I'm working on the panel facing me as the whole dash has not been taken out if that makes since. Thanks again, Larry.