If this is your first visit, be sure to
check out the FAQ by clicking the
link. You must register
before you can post: click the register link to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
We upgraded vBulletin to version 6 and with each new version come changes in appearance and functionality. Let me know if something is not right. - Dave
This is to notify all our members that since our recent software upgrade the system is not sending out any emails. This includes birthday emails, membership expiration emails and new Private Message notification emails. We recommend that all paid members check the date that they last paid as you will not get any warning that your membership is expiring. The system is also not sending out email notices when a new user signs up. If you just signed up you will not be notified via email that your membership has been accepted. Please be patient as it may take longer than usual to process your application. Our webmaster Dave Dare is aware of the problem. Hopefully it is fixed sooner than later. - John
I been trying to pin point the problem with my headlights. I put in a new dimmer switch and changed the light switch and still have the same issue. The low beams will not work however when I put on the high beams both low and high beams work.
Does anybody have any ideas what I should be looking for. I just purchased the wiring diagrams so will trace the wires.
There was no need to purchase the wiring diagrams. All the wiring diagrams are located in the Technical Resource Library. If the low beams don't work by itself and you replaced the dimmer switch then the problem is most likely with the red/black wire between the dimmer switch and the driver side headlight.
The Technical Resource Library (TRL) is there for all to use. Electrical Diagrams are about 1/4 of the way down the screen. Find it and click on it. Click on the diagram(s) you need for printable size pages:
Comment