Transmission Seals

Hi Kultulz

The Ford part number would help if you have them.

Phil

Go To This Thread-

http://www.squarebirds.org/vbulletin...ad.php?t=14743

[stubbie]

Hi Kultulz

The Ford part number would help if you have them. Yes there are transmission places around and I'm sure one of them could get the part if I had the numbers. The problem with a lot of these tranny places is if it's out of the ordinary then they don't want to help you find what you are looking for. There was I think a cruise o matic gearbox used by Ford here in the mid sixties but I'm not 100% sure of this or if it was the same box. I've finally got some days off work and I can start looking into it.
Thanks for your help.

Phil

[YellowRose]

Transmission Seals

Gary ~ KULTULZ sent me a graphic showing the transmission seals for a '60 Squarebird, and also for a '64 Tbird. You will find it here in the TRL.

http://www.squarebirds.org/picture_g...ectorSeals.htm

The problem is finding the seals in OZ.

There has to be a source down there.

Here are the seals separately- http://www.charlietranny.com/Fordomatic%20seals.htm

Are there (has to be ) tranny shops down there? They should be able to get them. I will give you the FORD PN if wanted.

[stubbie]

Hi Kultulz

Your guru pointed me in the direction of Fatsco. They have a seal kit at a cost of $52 and $52 postage (FOR A SEAL KIT) What the? Anyway I think I'll keep looking. Anyone know which parts people might have seal kits for an MX transmission.

Thanks Phil

And I mis-read your post desiring AU sourced parts only...

Hopefully, someone can help you source the seals there.

[stubbie]

Thanks Kultulz

I had problems with my post and after writing it several time have omitted that the transmission is a PCE-AT-MX (possible digit missing here) but thanks for the help I will try the guru.

Cheers

The FORD PN will most likely not help you. You should have the ASSEMBLY TAG I.D. NO. to positively ID the trans.

I can give you sources for the seals, but this guy- http://www.broaderperformance.com/ -is the guru on this series trans.

If he can't help you, post back and I will give you some parts houses that specialize in older trans.

[stubbie]

I have a 64 Thunderbird with a Cruise o Matic gearbox and I need to get a couple of seals for it. If anyone knows the part number for the shift selector shaft seal and the extension housing seal (if any) could you let me know and I will attempt to get them in Australia first. I have looked at a couple of web sites and found numbers but I am not sure if these are the correct Ford numbers or just company part numbers if you know what I mean.

Thanks Phil