What Is The Width of the Bulletbird Clock?

[YellowRose]

Can someone with a Bulletbird get to their Tbird and give me the width in inches of the Clock? Thank you!

[OUR5T8BIRD]

Can someone with a Bulletbird get to their Tbird and give me the width in inches of the Clock? Thank you!

The housing opening is 4 7/8 " and the finished outer ring of the opening is 5 " . Hope this helps as I do not have a clock .

[YellowRose]

Thanks Martin! What is the diameter of the Squarebird Clock? Is it also 5"? The reason why I am asking is because of Mike ~ aboveabovethegarage came up with that idea of putting in that Kicker Bluetooth Receiver in place of the clock. I am wondering if the hole for the Bulletbird Clock is the same diameter of the Squarebird. For some reason, I thought I saw somewhere that the hold for the Squarebird Clock was 3" in diameter.

[OUR5T8BIRD]

Thanks Martin! What is the diameter of the Squarebird Clock? Is it also 5"? The reason why I am asking is because of Mike ~ aboveabovethegarage came up with that idea of putting in that Kicker Bluetooth Receiver in place of the clock. I am wondering if the hole for the Bulletbird Clock is the same diameter of the Squarebird. For some reason, I thought I saw somewhere that the hold for the Squarebird Clock was 3" in diameter.

The square bird clock is a 3 " od housing whit a larger shoulder and three bolts to go into holes for mounting . The chrome clock bezel has a slight shoulder that would sit in the opening at 4 " od.

[YellowRose]

Thank you Martin. Then from what I am getting that unit would be to small to fit into that 5" Clock diameter of the Bulletbird. I was hoping it could work on that Bird also,, apparently not. Thanks!