Announcement

Collapse
No announcement yet.

69 Ford with a 429 question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dakota Boy
    replied
    previous owner made some solid steel shims and ran a huge bolt up through the center of them, plus through the original 460 motor mount.

    Leave a comment:


  • davidmij
    replied
    Hey Greg, so are the motor mounts still stock? Does anyone know the difference between a 430 and a 429? (don't say 1) I ran into an old friend at the gas station and he has an old Lincoln with the 430 - he said he's going to put a different engine in it so I may be able to get the 430.
    Mike, what is the "cross member" you're talking about? Can't be the round bar under the engine.

    Leave a comment:


  • Dakota Boy
    replied
    It will fit. I have a 460 in my car.

    You will need a Torker II or Performer intake manifold and you will then have about 1 to 1 1/2 inches to spare with the hood clearance.

    Leave a comment:


  • fomoco59
    replied
    I once saw a guy's '59 with a 429. I think he said he "had to flip the crossmember to get it down in there" and the air cleaner was still too high to close the hood. Maybe others have done it differently.

    Leave a comment:


  • davidmij
    started a topic 69 Ford with a 429 question

    69 Ford with a 429 question

    I found a 1969 ford galaxie country squire station wagon with a 429 engine. Does anyone know if this 429 will drop right into a 59 T-bird?
Working...
X