This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 10-10-2010, 01:57 AM
byersmtrco's Avatar
byersmtrco byersmtrco is offline
Administrator
 
Join Date: Sep 28 2004
Posts: 1,611
byersmtrco is on a distinguished road
Default Block Casting # Questions

So, today I got the 390 engine that came out of my car out of storage. Long story. Anyways, in the very early 70's my dad decided the 352 wasn't fast enough. (Well he was right) He had San Jose Ford install a hi-perf 390. In those years, you could only buy a hi-perf "crate eng" (as us GM guys call em) in short block form. He was told, it was the direct replacement for a 68 Mustang GT or a 69 Mach 1. The thing always ran like bat out of h___. So I'm sure it wasn't just some station wagon issue engine they put in there. Back in the day, it was really surprising how fast that car would go. It just wore out (200K mi) 30 yrs later.

So, I'm tring to ID this thing. Where are the casting #'s? What am I looking for. I've ID'd Chevrolet blocks in the past, even Mopar's bet never a Ford.

I'd appreciate any input. Were these engines steel crank, or cast?
I know the heads are the orig TB issue 352 heads.
The orig intake and exh/manifs are on my new eng in the car now (which also runs like a bar out of h___ btw)

Am I looking for stamped #'s somewhere or cast in #'s??

Thanks again
__________________
John Byers
1960 Convertible (Orig owner)
Pic of car with my son Justin (15 Y/O 6'1")
Poss 3rd Gen T/B owner
Reply With Quote
  #2  
Old 10-10-2010, 03:20 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,158
simplyconnected is on a distinguished road
Default

John, your engine is a hybrid (which is more common than most people think). All FE cylinder centers were exactly the same (4.63"), which is why all the different bolt-on parts fit other FE engines. They could also swap crankshafts for more or less stroke, making them different cubic inches in size.

Here is your block casting location.

The 390 had a bore of 4.05" (102.87 mm) and stroke of 3.785" (96.14 mm).

You could swap a crankshaft from a 410 or 428 (both identical stroke of 3.98"), and that 390 just turned into a 410 cubic inch engine. (Now you know where 410's come from.) Of course, HP and torque is determined by heads, carbs, and cam combinations along with displacement.

Ford FE engines were popular because of their numerous variety of combinations to suit the user's requirements.

I hope your 390 gets a major overhaul. Use good moly rings and your engine will return at least another 250k miles. - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 03:59 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.