This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 07-05-2010, 08:22 PM
60 T-Bird 60 T-Bird is offline
Experienced
 
Join Date: Jun 2 2010
Posts: 345
60 T-Bird is on a distinguished road
Default How to pull a 430

Just bought a 60 bird with a 430. I'm doing a rebuild on it and the tranny. I am assuming that the engine needs to be free of the tranny. Looks too tight to drag both out. I've removed the radiator. Does the AC condenser come out too? Headers? Any input or files are appreciated.
Reply With Quote
  #2  
Old 07-05-2010, 10:08 PM
partsetal's Avatar
partsetal partsetal is offline
Super-Experienced
 
Join Date: Jun 4 2005
Posts: 532
partsetal is on a distinguished road
Default

If you've got a/c, you have to separate the tranny from the motor. The evaporator box will not permit them to come out together. Care must be taken to avoid damaging this box when maneuvering the motor, remove the front half if you can to make things easier.
Remove the condenser just to give more room in case the engine slips forward as you are lifting it. The exhaust manifolds, generator and water pump can stay on. Remove the p/s pump if you can, otherwise remove the lines to the control valve. Remove the compressor, but the bracket will clear. Remove the three idler arm bracket to frame bolts and drop the tie rods and center link to clear the oil pan. You will have to unbolt the starter, but you can't remove it until you move the motor forward.
If you are using an engine crane, do some measuring to make sure your lift arm will go high enough to allow the oil pan to clear the nose. This is a heavy engine and it is maneuvered with small planned movements, take your time.
I've taken several out and put several in, some with the tranny attached. I may not have covered everything, so let me know if you have questions.
Carl
Reply With Quote
  #3  
Old 07-06-2010, 04:31 AM
60 T-Bird 60 T-Bird is offline
Experienced
 
Join Date: Jun 2 2010
Posts: 345
60 T-Bird is on a distinguished road
Default

Thanx Carl...great input. Didn't know about the starter. I'll remember that putting it back in. Interesting about the tie rods. One tie rod end it broken from pushing the car around without the engine running. I have to temporarily fix it to move the car in the garage where I have a 3 ton chain hoist. I hear the engines weigh 735 lbs. I also heard Ford stopped making them because they never blew up!
Reply With Quote
  #4  
Old 07-08-2010, 12:00 PM
tp tbird's Avatar
tp tbird tp tbird is offline
Experienced
 
Join Date: Dec 17 2007
Posts: 188
tp tbird is on a distinguished road
Default

I did my 59 430 and it is not fun ,but can be done.I had to take mine out three times .The first time was with the tranny attached to it and back in with it. The other two were without the tranny this was done do to a oil leak on engine rebuilt. You can look at my other post on what it did and the problems I had. Also have some pictures on :http://s328.photobucket.com/albums/l356/tptbird/ ,good luck
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:31 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.