This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 05-31-2010, 10:10 AM
Dakota Boy's Avatar
Dakota Boy Dakota Boy is offline
Super-Experienced
 
Join Date: Jun 30 2009
Posts: 1,501
Dakota Boy is on a distinguished road
Default refinishing inside of fender wells

Cant decide what to do.

Fender wells have some newer undercoating (previous owner applied) on them now. A few spots have some purple overspray from when the car was painted. I'm also going to clean up the brake drums so they look good behind the mags.

Here's what I'm thinking: Eastwood Rust Encapsulator where there is any surface rust. Eastwood Underhood Black in the fender wells, and Eastwood Chassis Black on the brake drums. I think Chassis Black might be too glossy to use on the fender wells; especially on the front where it would be highly visible ?

Opinions and suggestions are, as always, greatly appreciated....
Reply With Quote
  #2  
Old 05-31-2010, 12:21 PM
Anders's Avatar
Anders Anders is offline
Moderator
 
Join Date: Jan 19 2008
Posts: 2,160
Anders is on a distinguished road
Default

Iīm not aware of Eastwoods products, but the fenderwells must be in a matt colour, preferibly in a undercoat grain & finish.
Regarding the drums I would say matt or semimatt. Not glossy. But priority is something that donīt disapear due to the heat...
__________________
..."Lil darling Ruth"
http://www.tbirdregistry.com/#33158
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:34 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.