This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 08-02-2010, 01:42 PM
howelljason70 howelljason70 is offline
Newbie
 
Join Date: May 10 2010
Posts: 16
howelljason70 is on a distinguished road
Default Cruise-o-matic Torque Converter

Does anybody know if a FMX Torque Converter is compatible with a cruise o matic? I know the two transmissions are very similar, but I am not quite sure if the torque converters are exchangeable. If not does anybody know where I could get a Cruise o matic converter? I am having quite a hard time finding one. Any help is appreciated!
Reply With Quote
  #2  
Old 08-02-2010, 02:24 PM
Paulie9fingers's Avatar
Paulie9fingers Paulie9fingers is offline
Apprentice
 
Join Date: May 3 2010
Posts: 44
Paulie9fingers is on a distinguished road
Default

You can check with a local transmission shop or search online, I'm pretty sure it's the same though. I did a quick online search and came up with this, http://transpartsonline.com/tpfile/F...SION_PARTS.htm and this, http://www.pdqparts.com/index.shtml .

Good luck
__________________
" If my calculations are correct, when this baby hits eighty-eight miles per hour ... you're gonna see some serious sh*t. "

Dr Emmett Brown, 1985
Reply With Quote
  #3  
Old 08-02-2010, 04:46 PM
howelljason70 howelljason70 is offline
Newbie
 
Join Date: May 10 2010
Posts: 16
howelljason70 is on a distinguished road
Default

Is the bolt pattern the same or do I have to specify for a 352? Has anyone had any experience buying a torque converter for a cruise-o-matic?
Reply With Quote
  #4  
Old 08-02-2010, 05:27 PM
KULTULZ
 
Posts: n/a
Post

The X-Series (CRUISEOMATIC) and the FMX (while similiar) are two different animals.

This gentleman is the final authority on these trans-

http://www.broaderperformance.com/fm..._transmiss.htm
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 03:10 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.