This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 02-24-2010, 09:23 AM
Larry Jones Larry Jones is offline
Experienced
 
Join Date: Feb 3 2009
Posts: 265
Larry Jones is on a distinguished road
Default Installing a new engine

I own a 62 t-bird convertible with several small cracks in the block.Someone is selling a 64 fe390 casting C4AE the heads are later model but hesays he has C4AE-g heads to go with it.It also comes with a Edelbrock Aluminum Intake and a Holly 600. This engine has been broken in on the engine stand and ready to install. He wants 1000.00 dollars for it. So I would loose my orginal intake and my exhaust manifold also. What about using the autolite 4100 carb. Iam concern if I go with this would everything bolt right into place. Would I loose the choke assembly also being I would get the Holly 600. My motor has a two motor mount would this 64 engine have the same. Larry
Reply With Quote
  #2  
Old 02-24-2010, 06:49 PM
ozbird ozbird is offline
Apprentice
 
Join Date: Sep 22 2009
Posts: 37
ozbird is on a distinguished road
Smile

Hi Larry,

sounds like a deal. Suggest you look at this seriously and have all the standard items off your current engine swapped over. Then sell all the performance parts to make some $$ back.

And yes, it will fit without issues. Just do it.

Graeme
Reply With Quote
  #3  
Old 02-24-2010, 08:27 PM
gaffney1951 gaffney1951 is offline
Super-Experienced
 
Join Date: May 29 2007
Posts: 553
gaffney1951 is on a distinguished road
Default 64' 390 ...

If it's a 64 it should bolt right in. Still a two bolt motor mount. That's a great price if your confident that who ever rebuilt it new what they were doing. Mike
Reply With Quote
  #4  
Old 02-24-2010, 08:41 PM
Alan H. Tast, AIA Alan H. Tast, AIA is offline
Experienced
 
Join Date: Jan 5 2008
Posts: 213
Alan H. Tast, AIA is on a distinguished road
Default

You can use the heads, carb and intake from your engine. I don't think there's any substantial difference between the '64 and '62 heads. The '64 uses the same motor mount bosses that '62 did. In essence the '64 engine is externally the same as a '62: there are some improvements internally, such as the camshaft retainer plate vs the '62's thrust button, plus provision for the alternator mounting hole (and if you're getting a passenger car engine that had a generator it may not have the mounting hole). I ran a '64 engine in my '63 for many years and still have this engine available for sale, though the buyer will need to grind the crank and install new bearings for the lower end.
__________________
Alan H. Tast AIA, LEED AP BD+C
Technical Director/Past President, Vintage Thunderbird Club Int'l.
Author, "Thunderbird 1955-1966" & "Thunderbird 50 Years"
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:05 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.