This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
Old 06-04-2003, 08:14 PM
63tbirdrick 63tbirdrick is offline
Join Date: May 13 2003
Posts: 94
63tbirdrick is on a distinguished road
Default 60 stock height

Could someone please measure their 60 (or 58, 59) at the center of the fender well to the ground.(or any other simple referance point to compair with mine) Mine looks like it sits higher than it's supposed to and I cant find anything on the internet that gives these specs. Thanks for your help.
Reply With Quote
Old 06-05-2003, 09:38 AM
Monty Monty is offline
Join Date: May 14 2003
Posts: 50
Default RE: 60 stock height

I have this same problem with my WWII Willys Ford jeep. 1st the shop manual should be looked at as it was the measurement for the car when it was produced....with the recommended tire size(s)... next you must taken in your tire size and wear into account (yours rides high so wear may not be an issue) If you ask someone else to give you their hight you don't know if their tires are factory, you don't know how much their springs are worn and how long the shocks have been on and how many miles and what conditions that other owners' car has been through. Or if it was a swing 90 Ib girl or a family of 5 living out of the car. I don't have the manual here at the office. My local expert just told me.. does the car look level.. thus all springs are worn the same. Also in the new table top book at store I believe I read the factory clearence from the pan to the ground was 5 and 1/2 inchs. But this still doesn't account for you possible tire size/wear and remember some tires are meteric today.
Reply With Quote
Old 06-05-2003, 06:16 PM
Alexander's Avatar
Alexander Alexander is offline
Join Date: Oct 30 2002
Posts: 3,337
Alexander is on a distinguished road
Default RE: 60 stock height

The stock height of the car was only 52.48 inches with load.

1959 Hardtop
1960 Golde Top
1959 Hard Top
1960 Golde Top
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 09:27 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by