This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #21  
Old 01-26-2009, 10:09 AM
bcomo bcomo is offline
Super-Experienced
 
Join Date: Sep 23 2005
Posts: 1,224
bcomo is on a distinguished road
Default

First check if the vacuum advance is working:

Unclip the distibutor cap, and move it to the side.
Look inside and you'll see the vacuum advance arm connected to the advance plate.
Connect a hose directly to the vacuum advance line. Suck on the hose and you should see the vacuum advance arm move the plate. It should stay there as long as you keep suction on the hose.

If it doesn't do the above, then you need to replace the vacuum advance.

While you have the distributor cap off, turn the rotor to the right and let go. It should move freely, and then snap back when you let it go. If it doesn't, then you can spray some WD-40 under the plate to help loosen things. Don't use carb cleaner.

You should also remove the rotor and lube the felt under the rotor with about 5 drops of 10W oil (Three in One oil is fine). That helps to keep the advance plate lubed.

There is also a small oil cap at the driver side of the distributor. It's not easy to see, but it's there. That needs to get about 6 to 8 drops of the same oil. It's important, since that lubes the distributor bushings.


You can check the timing doing it the way you do it on your other car. Advance in small amounts and listen for Ping. If it Pings, then back off until it quits.

Auto Zone will loan you a Timing Light -- you really should have one. Good idea for a B'Day present.
__________________
Bart
1960 Hard Top/430
Thunderbird Registry Number 1231
Reply With Quote
  #22  
Old 01-26-2009, 10:30 AM
byersmtrco's Avatar
byersmtrco byersmtrco is offline
Administrator
 
Join Date: Sep 28 2004
Posts: 1,610
byersmtrco is on a distinguished road
Thumbs up

All true on the dist. All good points(no pun intended).
Discon vac/adv when checking timing with a light.
Mine is set at 8 deg BTDC (It pings at 10) Every engine is different.
__________________
John Byers
1960 Convertible (Orig owner)
Pic of car with my son Justin (15 Y/O 6'1")
Poss 3rd Gen T/B owner
Reply With Quote
  #23  
Old 01-26-2009, 11:04 AM
JohnG's Avatar
JohnG JohnG is offline
John
 
Join Date: Jul 28 2003
Posts: 2,228
JohnG is on a distinguished road
Default

While in the distributor, grab the shaft and see how much side to side play there is.

Originally, I would set my timing and then find a week later it seemed to be 5 degrees different. Finally I realized the bushing was worn the shaft had way too much side to side play. The original distributors had 1 or 2 places to add oil to lube the shaft/bushing (little spring loaded caps cover them), which eventually wore due to lack of attention. I got another distributor and then could count on the timing. You can probably buy a bushing and replace it yourself

john
Reply With Quote
  #24  
Old 01-26-2009, 05:41 PM
Richard D. Hord Richard D. Hord is offline
Super-Experienced and Proud Kentuckian who bleeds Ford Blue.
 
Join Date: Dec 16 2008
Posts: 2,868
Richard D. Hord is on a distinguished road
Default Thanks

THANKS guys. I will give each suggestion a try and go from there. YOU GUYS ROCK!!!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:43 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.