This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #11  
Old 06-04-2009, 08:06 AM
JohnG's Avatar
JohnG JohnG is offline
John
 
Join Date: Jul 28 2003
Posts: 2,229
JohnG is on a distinguished road
Default

Prior to setting the puller up, you can possibly loosen things up a bit in the following way: pull on the wheel with one arm wrapped around it while taking a modest ball peen hammer and giving the threaded shaft that the nut came off of a few taps. Don't overdo it and damage the threads on the shaft. If you have a friend to help, this is good. One can pull on the wheel and the other tap.

You could also put a spare nut on the very end of the shaft and hit that. The threads will be protected while the nut doesnt matter.

The basic idea is the shock of the hammer strikes may break some of the bonds holding the steering wheel on. Kind of like a poor man's impact gun. Basically the same method you might use to get the flywheel off of a push type Briggs and Stratton lawn mower.

John

Last edited by JohnG : 06-04-2009 at 12:01 PM.
Reply With Quote
  #12  
Old 06-04-2009, 11:27 AM
Hawkrod Hawkrod is offline
Experienced
 
Join Date: Oct 31 2005
Posts: 288
Hawkrod is on a distinguished road
Default

You can use fan bolts if you have extras laying around. Don't use them on a fan again as they stretch quite a bit when being used on a puller but when I am in a junkyard that is where I grab them (I carry a plate with holes in it and grab bolts in the junkyard, less to carry!), Hawkrod
Reply With Quote
  #13  
Old 06-04-2009, 12:06 PM
tbird430's Avatar
tbird430 tbird430 is offline
Super-Experienced
 
Join Date: Jun 18 2007
Posts: 2,616
tbird430 is on a distinguished road
Post

In the posted pic of the steering wheel "puller" tool, the main body (which the center bolt threads into) is flipped around incorrectly. The flat machined side should rest against the 2 outter bolt heads when being used....

-Jon
__________________

The 1960 Ford Thunderbird. The WORLD'S most wanted car....

VTCI Member#6287.
Reply With Quote
  #14  
Old 06-04-2009, 02:43 PM
Anders's Avatar
Anders Anders is offline
Moderator
 
Join Date: Jan 19 2008
Posts: 2,160
Anders is on a distinguished road
Default

Quite a while since I visited this thread.
I fixed myself a tool last year before I sended my steering wheel to Jed Zimmerman for a restoration job. A stunning job by him. Other "vintage-car-friends" are very impressed. As a matter of fact, Im right now working with putting it back, but unfortunally my "c" clips is broken and I need to find a new one before I can go any further.
__________________
..."Lil darling Ruth"
http://www.tbirdregistry.com/#33158
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:37 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.