This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 07-02-2007, 10:08 PM
430MEL 430MEL is offline
Experienced
 
Join Date: Jun 14 2006
Posts: 154
430MEL is on a distinguished road
Default Steering questions?

Adjusting steering on my 1960 following manual.
Section 9-1, paragraph #11
Questions:
1. How do you know if you got ball nut centered-hate to guess that my 2-3/4 turns is as exact as their 2-3/4 turns.
2.The pics show 5 teeth on sector gear and 2 teeth on ball nut. Is centered when 3rd tooth of sector gear is between the 2 tooth of ball nut?
3. Do you need to take cover plate off to see this?
4. Is torque measure by turning sector shaft with torque wrench?
5. What lube do you put in steering box
Reply With Quote
  #2  
Old 07-04-2007, 02:27 PM
byersmtrco's Avatar
byersmtrco byersmtrco is offline
Administrator
 
Join Date: Sep 28 2004
Posts: 1,607
byersmtrco is on a distinguished road
Default

Steering gear. Hmmm, scary. Never dug into one of those. Years ago a company called Straight Line Power Steering her in San Jose rebuilt mine. I'm pretty sure (since these are really just a manual strg/gear) that they just run straight 90 wt gear oil.

I have adjusted the worm gear to get rid of "some" play. I just loosned the lk/nut and gave it a 1/4 turn. It worked good.
__________________
John Byers
1960 Convertible (Orig owner)
Pic of car with my son Justin (15 Y/O 6'1")
Poss 3rd Gen T/B owner
Reply With Quote
  #3  
Old 07-04-2007, 05:48 PM
tbirds8 tbirds8 is offline
Super-Experienced
 
Join Date: Nov 6 2006
Posts: 907
tbirds8 is on a distinguished road
Default

PLEASE Don't over tighting that. You can destroy the gears. I've seen this done on inspections in the 50s and 60s The rest of the front end has to be almost (and i repeat almost) perfect
Before you start turning those screws.
Reply With Quote
  #4  
Old 07-07-2007, 11:46 AM
byersmtrco's Avatar
byersmtrco byersmtrco is offline
Administrator
 
Join Date: Sep 28 2004
Posts: 1,607
byersmtrco is on a distinguished road
Default

Thanks! I know to be carefull. I did it maybe 2 yrs ago. No problems.
__________________
John Byers
1960 Convertible (Orig owner)
Pic of car with my son Justin (15 Y/O 6'1")
Poss 3rd Gen T/B owner
Reply With Quote
  #5  
Old 07-07-2007, 03:40 PM
Alexander's Avatar
Alexander Alexander is offline
Webmaster
 
Join Date: Oct 30 2002
Posts: 3,338
Alexander is on a distinguished road
Default

When I did the gear box tightening, I remove the pitman arm. I then turned the steering wheel end to end and found the center.

Follow the instructions in the shop manual.

Use a torque inch-pound wrench when doing the procedure. when you tighten the small screw on top of the gear box. Pretend that your hand is broken or you will overtighten it; permanently flattening the ball guide returns.
__________________
Alexander
1959 Hard Top
1960 Golde Top
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:15 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.