This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 02-22-2018, 07:02 PM
Zerkfitting Zerkfitting is offline
Newbie
 
Join Date: Jun 8 2017
Posts: 7
Zerkfitting is on a distinguished road
Default 48k Survivor

I bought a í65 Thunderbird last summer; it has 48,000 on the odometer. The car is solid (no rattles going over railroad tracks), everything works, the paint looks original, and I havenít noticed any signs of body repair; it is a survivor. The car was in the shop several times for about half the summer. Just about everything with a gasket has been serviced; I was fortunate to find a mechanic who still knows what a carburetor is. The car was running well at the end of the summer

My goal is to preserve the car for the next owner while I enjoy it for a few years. I think the best thing I can do for the car is to run it and maintain it.

I plan on doing some work on it myself this summer. I bought a set of service manuals to assist my mechanic and help me determine how things are put together for things I can do. Iím looking for tips.

One of the rear electric windows stopped working (it was working). The schematic looks straight forward but Iím not sure how to remove 50 year old panels without causing damage.

Iíll be replacing the drivers mirror with a correct one that has the remote cable. And Iíll add a mirror to the right side.

The interior door panels are the only parts that show wear. The door panel covering around door pulls is split on both doors, you can see the foam behind the covering. Iím not sure what to do about that short of an expensive replacement.

The car does have a couple mysteries. The drivers side sits 3/4Ē lower than the passenger side. I suspect the springs might be fatigued but I donít know. And the right front tire scraps the inner fender well when I backup and turn to the left, all other steering is OK; I wonder what tire size is normal I think the original tire size was an odd one).
Reply With Quote
  #2  
Old 02-23-2018, 11:16 AM
OUR5T8BIRD OUR5T8BIRD is offline
Experienced
 
Join Date: Mar 1 2017
Posts: 154
OUR5T8BIRD is on a distinguished road
Default

Quote:
Originally Posted by Zerkfitting View Post
I bought a í65 Thunderbird last summer; it has 48,000 on the odometer. The car is solid (no rattles going over railroad tracks), everything works, the paint looks original, and I havenít noticed any signs of body repair; it is a survivor. The car was in the shop several times for about half the summer. Just about everything with a gasket has been serviced; I was fortunate to find a mechanic who still knows what a carburetor is. The car was running well at the end of the summer

My goal is to preserve the car for the next owner while I enjoy it for a few years. I think the best thing I can do for the car is to run it and maintain it.



I plan on doing some work on it myself this summer. I bought a set of service manuals to assist my mechanic and help me determine how things are put together for things I can do. Iím looking for tips.

One of the rear electric windows stopped working (it was working). The schematic looks straight forward but Iím not sure how to remove 50 year old panels without causing damage.

Iíll be replacing the drivers mirror with a correct one that has the remote cable. And Iíll add a mirror to the right side.

The interior door panels are the only parts that show wear. The door panel covering around door pulls is split on both doors, you can see the foam behind the covering. Iím not sure what to do about that short of an expensive replacement.

The car does have a couple mysteries. The drivers side sits 3/4Ē lower than the passenger side. I suspect the springs might be fatigued but I donít know. And the right front tire scraps the inner fender well when I backup and turn to the left, all other steering is OK; I wonder what tire size is normal I think the original tire size was an odd one).
Scott : Can try and help out with suggestions on a few items . With the power window , lift the switch housing on the console and try to switch the left switch with the right switch for the rear windows . just swap the wires at the plug and see if it may be the switch . ( jumper wires can also be used .) Keep in mind that the switches in the rear can be cancelled out with the rocker switch on the console unit but will still work from the console . ( kid proofing ) If you have to remove the window to get to the motor, just remove the seat bottom, arm rest on that side and then the back of the seat and window panel . then the whole assembly has to come out to work on the motor .

As for the door panels if only cracked at the hand cup , check with a local ' used car dealer ' and ask them who they use for any vinyl repair to their vehicles . Better than replacing complete panels which are troublesome in my opinion .

The original tire size on the '65 was 8.15 X 15" . If you have changed over to radial, the closest in size is 215 X 75R X 15 . Some owners may go to 225 X 70R X 15 which may tend to give a bit of tire rub . One common area is on the left ( driver ) side when making a left turn and will rub on the steering box mounting bolts . Also check the front splash shields to make sure they are not bent .

To check riding height , here are the specks from wheel well opening to ground. ( as came from the factory )

hardtop - front - 27 21/32" ; rear - 22 23/32" .

Hope all this helps a bit .
Reply With Quote
  #3  
Old 02-23-2018, 11:52 AM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
 
Join Date: Jan 21 2008
Posts: 12,621
YellowRose is on a distinguished road
Default 48k Survivor

This is what a good vinyl repair techie can do... My '59 had a split in the dashpad when I bought it. During the customization of my interior, my interior guy told me he knew a great vinyl tech that could fix that so that it would look like new again. So he called him in, and he worked his magic on it. The first pic will show you the cracks in the pad. The second one will show the work he was doing on it to seal the cracks. The last pic will show you the finished job, and it still looks good like that to this day..
Attached Images
File Type: jpg DashSplitCloseUp.jpg (88.8 KB, 36 views)
File Type: jpg DashpadRepair3.jpg (53.7 KB, 36 views)
File Type: jpg DashpadRepairAfter2.jpg (57.7 KB, 36 views)
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

Contact me via Private Message for my email address, or (Cell) 210-875-1411 (Home) 210-674-5781
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #4  
Old 02-23-2018, 03:56 PM
Zerkfitting Zerkfitting is offline
Newbie
 
Join Date: Jun 8 2017
Posts: 7
Zerkfitting is on a distinguished road
Default

Thank you for the help. I'll be checking things out in the spring and I'll be looking into local vinyl repair information.
Reply With Quote
  #5  
Old 02-23-2018, 04:42 PM
OUR5T8BIRD OUR5T8BIRD is offline
Experienced
 
Join Date: Mar 1 2017
Posts: 154
OUR5T8BIRD is on a distinguished road
Default

Quote:
Originally Posted by YellowRose View Post
This is what a good vinyl repair techie can do... My '59 had a split in the dashpad when I bought it. During the customization of my interior, my interior guy told me he knew a great vinyl tech that could fix that so that it would look like new again. So he called him in, and he worked his magic on it. The first pic will show you the cracks in the pad. The second one will show the work he was doing on it to seal the cracks. The last pic will show you the finished job, and it still looks good like that to this day..
A picture is worth a thousand words Ray . Awesome job and thanks for sharing the pictures .
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:06 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.