This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
Old 02-18-2018, 09:33 AM
SaltySeabee SaltySeabee is offline
Join Date: Feb 17 2018
Posts: 1
SaltySeabee is on a distinguished road
Default Flickering and flashing 64

Hey all,

I have a 64 landau that I've had for over 30 years. It was involved in a pretty major wreck and I finally got it out of the shop a few weeks ago. Since then when you turn on the lights the taillights flash and the headlights pulsate or flicker. There is also a faint clicking in the dash on the driver's side. Any ideas on this issue?

Reply With Quote
Old 02-18-2018, 11:54 AM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
Join Date: May 26 2009
Posts: 7,630
simplyconnected is on a distinguished road

Your headlight switch includes an internal self-resetting circuit breaker. Somewhere, you have a short circuit. The short may be caused by a pinched wire between sheet metal parts. Start looking in areas that were disassembled then re-assembled.

If the short doesn't present itself right away you will need to follow sound troubleshooting practices using ALL your senses. For example, feel for warm wires

Your car uses wire harnesses that plug into each other. Start in the wrecked area and unplug wire harnesses BEFORE that area. If your problem goes away, carefully follow the wires downstream, looking for the obvious. Also, look inside your plugs for green or melted plastic.

My cousin has a Coleman trailer that he converted the lights to LED. (Good move.) After he changed bulbs, the lights wouldn't work and the plug at the trailer tongue was warm. Since he worked on light housings, I went there first. Sure enough, one of his pigtail wires was folded sideways and grounded inside the lamp holder. For classic cars with pigtail-style lamp sockets, I always pull the wires back first before twisting the lamp, then I let the wires and springs contact the lamp. This helps preserve the keyed Bakelite disk, springs and contacts inside the lamp holder by keeping them in-line and straight. These parts become fragile after many years but the good news is, all the parts are still available. - Dave
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
Old 02-18-2018, 12:06 PM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
Join Date: Nov 23 2009
Posts: 5,682
jopizz is on a distinguished road

To your knowledge did the shop disconnect the turn signal switch or wiring under the steering column. It almost sounds like you have turn signal wires that were connected wrong. The clicking you hear is probably the flasher.

John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223 856-779-9695
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 01:51 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by