This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 09-10-2017, 01:49 PM
bpetska bpetska is offline
Apprentice
 
Join Date: Feb 15 2013
Posts: 39
bpetska is on a distinguished road
Default Installing Bumpers

I currently have my front and rear bumpers assembled with the brackets on. My question is what is the best way to install. All assembled or brackets put on and then the bumpers?
Thanks,
Bill
Reply With Quote
  #2  
Old 09-10-2017, 02:38 PM
jopizz's Avatar
jopizz jopizz is online now
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 4,749
jopizz is on a distinguished road
Default

I always install them with the brackets on. As for the rear bumper I build a platform out of some old tires and plywood even with the rear of the car so I can just slide the bumper into place.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #3  
Old 09-10-2017, 06:49 PM
partsetal's Avatar
partsetal partsetal is offline
Super-Experienced
 
Join Date: Jun 4 2005
Posts: 527
partsetal is on a distinguished road
Default

I install them with the brackets on, but loose so that adjustments can be made and then tightened in position. Two bolts at the rear a bit difficult to reach, but it can be done.
Carl
Reply With Quote
  #4  
Old 09-10-2017, 11:57 PM
JohnG's Avatar
JohnG JohnG is offline
John
 
Join Date: Jul 28 2003
Posts: 2,228
JohnG is on a distinguished road
Default

I did the same as Carl. Had a number of small rugs for keeping anything from being dinged. (if you have paid to have them rechromed, the thought of them getting damaged in any way might bring on psychological trama . . . )

Leaving things loose, especially in the front, can be important so that you get everything even and symmetric. There is definitely some "play" in the bolt positions. The back, as I recall, was more straightforward.

John
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:35 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.