This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 10-13-2010, 05:04 AM
eschober's Avatar
eschober eschober is offline
Newbie
 
Join Date: Sep 4 2010
Posts: 14
eschober is on a distinguished road
Default headliner replacement

Does anyone know the correct siz/type of staples used when replacing the headliner on a 1960?
Reply With Quote
  #2  
Old 10-13-2010, 07:58 AM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
 
Join Date: Jan 21 2008
Posts: 11,819
YellowRose is on a distinguished road
Default headliner replacement

Hi Ewald,

If you use the search engine and search for headliner staples or maybe it was "headliner staples" you should find this lists of threads on the subjecting of replacing and installing a headliner. Including information about staples. Those used by Ford back then do not seem to be available any longer. Alexander said he used regular 3/16" staples for a staple gun. Look through the other threads listed also. They may be some help to you.

http://www.squarebirds.org/vbulletin...ad.php?t=10183
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

rayclark07"at"att.net (Home) 210-674-5781 (Cell) 210-875-1411
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

Last edited by YellowRose : 10-23-2011 at 02:02 PM.
Reply With Quote
  #3  
Old 10-13-2010, 09:01 PM
DKheld's Avatar
DKheld DKheld is offline
Super-Experienced
 
Join Date: Aug 27 2008
Posts: 1,431
DKheld is on a distinguished road
Default

I installed my headliner myself. I used a poly fabric between the roof and headliner for added heat and sound blockage since I couldn't find more of the "stuff" Ford used - mine was in good shape just wanted a little more insulation. The poly fabric weighed next to nothing so didn't think it would make it sag and so far so good. (4-5 years?) The paper tack strips were still in good shape on mine so didn't have to replace them. I tried 4-5 different electric staplers and 4-5 different size staples but never could get them to work. Even went to a hardware store and bought the biggest baddest electric stapler they had - no luck.

Went by a trim shop that a friend recommended and he laughed at trying to use an electric stapler. He let me borrow his air stapler and it went very easily. He gave me his box of staples too but I don't remember what size they were other than they fit his gun. Only advice I can give is to cut the initial hole for the light very small if it is not already cut out - almost cut mine too big the first shot because of shrinkage when steaming the wrinkles out. The headliner shrank more toward the front so the hole "moved" to the front of the car.

I ordered a headliner from one of the parts houses and it was waaaay off in color. Very white compared to mine and there was no difference in color in mine between the exposed parts and the parts hidden from sunlight for 40 years behind the chrome trim. Took the original to an upholstery shop and had them match the color and grain. Came out great and was only $25 more than the one I ordered.

Eric
registry 5347

Last edited by DKheld : 10-13-2010 at 09:04 PM.
Reply With Quote
  #4  
Old 12-21-2016, 11:37 AM
lake bird lake bird is offline
Newbie
 
Join Date: Jan 8 2013
Posts: 6
lake bird is on a distinguished road
Default new headliner sags in the middle 60 tbird

tried a heat gun didn't get aggressive no change in sag between two middle rib wires....what kind of stream gun should I use, does the headliner respond to the steam better than a heat gun ?
Lakebird/Rockwall,Tx
Reply With Quote
  #5  
Old 12-21-2016, 02:15 PM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 4,749
jopizz is on a distinguished road
Default

A heat gun or steam will only remove small wrinkles. If you have a sag that means that you need to pull the headliner tight and restaple at either the front, back or sides.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #6  
Old 12-21-2016, 04:16 PM
Yadkin Yadkin is offline
Banned
 
Join Date: Aug 11 2012
Posts: 1,910
Yadkin is on a distinguished road
Default

I bought a cheap air-powered staple gun at Harbor Freight to install mine. They have a variety of stable sizes- choose the one that fits the material that you are stapling to.

My 64 had carboard strips that were deteriorate. I found a hard rubber product about the same cross section and replaced all of it.
Reply With Quote
  #7  
Old 01-03-2017, 09:37 PM
c4clewis's Avatar
c4clewis c4clewis is offline
Tinkerer
 
Join Date: Aug 18 2010
Posts: 103
c4clewis is on a distinguished road
Default

Be careful and don't get it too tight before you put in the trim. The trim takes up more slack than you might think and if the headliner is stapled too tightly the windshield center trim "may" cause it to tear...so I've heard...from a friend.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 04:19 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.