This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 04-16-2012, 07:03 AM
elvis elvis is offline
Apprentice
 
Join Date: Mar 31 2011
Posts: 43
elvis is on a distinguished road
Default front brake hose

HI I did the disc brake conversion and those banjo bolt are driving me crazy they leek I change cooper washers 4 time and torque soft and hard steel leek and Im not even touching the brake pedal now my question ? why can I not use the original granada front brake hose???
__________________
" go for your dreams "
Yves as Elvis
Reply With Quote
  #2  
Old 04-16-2012, 09:09 AM
DKheld's Avatar
DKheld DKheld is offline
Super-Experienced
 
Join Date: Aug 27 2008
Posts: 1,428
DKheld is on a distinguished road
Default

From what I remember (did mine about 8 years ago) the Granada hose has a long solid tube where it connects to the caliper and that interferes with some part of the suspension when turning.The connector was wrong where it bolts to the original brake hose (could change that if you have a brake line flaring tool) and it wasn't long enough to allow for full turning radius.

I'm trying to dig up my receipts and find out where I ordered my banjo bolts (some speed shop in California) as well as the hoses I used. I'll post asap.......remember those days - it was very frustrating. I figured out the thread pitch on the Granada caliper and the size banjo bolt needed for the hole on the brake line and searched for that size banjo bolt - that speed shop was the only place I could find the right one - but that was years ago - may be more available now.

You are using a copper washer on the top and bottom of the hose connection at the caliper - right?

You can see if you installed the Granada hose in the caliper it would stick out toward the spring tower and get broken off over the first bump thus the need for the right angle of the hose with the banjo bolt.




Link to a Granada hose pic
http://www.oreillyauto.com/site/c/de...3349&ppt=C0066




Eric
registry 5347

Last edited by DKheld : 04-16-2012 at 09:14 AM.
Reply With Quote
  #3  
Old 04-16-2012, 11:10 AM
KULTULZ
 
Posts: n/a
Question

http://store.fedhillusa.com/316475mmtubingandnuts.aspx
Reply With Quote
  #4  
Old 04-16-2012, 11:18 AM
elvis elvis is offline
Apprentice
 
Join Date: Mar 31 2011
Posts: 43
elvis is on a distinguished road
Default

thanks eric dont want you to search the banjo is BQ8090 7/16 24 1 in long the hose I have I think it's GM 78 eldorado I see how the granada hose will interfer. maybe the od of my cooper washers is to big and does`nt compress flat on the hose and leak I'll buy some new
__________________
" go for your dreams "
Yves as Elvis
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 04:44 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.