This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 08-19-2011, 08:29 AM
kevin_tbird kevin_tbird is offline
Experienced
 
Join Date: Jun 12 2011
Posts: 157
kevin_tbird is on a distinguished road
Default Horn Ring

I know the assembly of the horn ring to the steering wheel has been covered a bunch of times. But I think this is actually a new question.

Should the horn ring and retainer move freely up and down when mounted to the steering wheel?

When I press on the ring my spring inside the retainer on the top of the steering wheel does not compress. The horn ring just flexes or bends slightly. I'm wondering if the retainer that I have is from a vehicle that is not a Thunderbird.

My car had a steering wheel from another model/year in it when I purchased it. So I've never seen the right wheel assembly.

Does anyone know where I can get part #'s 3660 & 3629. [I'm using the Thunderbird Headquarters assembly drawing as a reference]

Last edited by kevin_tbird : 08-19-2011 at 08:33 AM.
Reply With Quote
  #2  
Old 08-19-2011, 11:48 AM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
 
Join Date: Jan 21 2008
Posts: 11,940
YellowRose is on a distinguished road
Default Horn Ring

One of the best persons to answer that question might be Carl ~ partsetal. He also probably has the right parts from one of his parts cars. Send him a Private Message (PM) and ask him to view your post and ask him if he has those parts.
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

rayclark07"at"att.net (Home) 210-674-5781 (Cell) 210-875-1411
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #3  
Old 08-24-2011, 09:06 AM
kevin_tbird kevin_tbird is offline
Experienced
 
Join Date: Jun 12 2011
Posts: 157
kevin_tbird is on a distinguished road
Default

This is frustrating. I purchased another horn assembly (minus the horn ring) and found that mine was exactly the same. So I believe I am working with the right parts.

After reassembly I was pushing on the horn ring at various points - and the horn ring broke where the spokes connect to the flat plate. @#$%!

I am only getting about 1/16" of movement in the base triangular plate. Most of the motion comes from the flex of the horn ring (which is now broken).

Anyone who has their steering wheel off. I'd really like to know how much motion there should be in the contacting plate.

Thanks

Kevin
Reply With Quote
  #4  
Old 08-24-2011, 02:31 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,163
simplyconnected is on a distinguished road
Default

Hope these pictures help.
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #5  
Old 08-25-2011, 10:47 AM
kevin_tbird kevin_tbird is offline
Experienced
 
Join Date: Jun 12 2011
Posts: 157
kevin_tbird is on a distinguished road
Default

reply. I've got all the right parts in the right order. I guess I just expected more travel in the contacting ring.
Reply With Quote
  #6  
Old 08-25-2011, 11:21 AM
JohnG's Avatar
JohnG JohnG is offline
John
 
Join Date: Jul 28 2003
Posts: 2,229
JohnG is on a distinguished road
Default

are you having trouble with the horn ring contacting the spring on the left side (which complets the circuit which trips the relay to blow the horn) ?

If so your steering column may need to be pulled out some to reduce the gap. They slip over time. People then lean on the poor horn ring more and the spokes get broken.

Mine came with a broken ring. Had little luck getting it
repaired, finally got a good one on Ebay.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:31 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.