This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #11  
Old 08-17-2011, 10:25 PM
1960_430_AU's Avatar
1960_430_AU 1960_430_AU is offline
Experienced
 
Join Date: Nov 16 2010
Posts: 143
1960_430_AU is on a distinguished road
Default

Now that saved me posting a pic thanks Richard

Bill here's a couple more
Attached Images
File Type: jpg 010l.jpg (340.2 KB, 126 views)
File Type: jpg 072l.jpg (314.7 KB, 125 views)
File Type: jpg 073l.jpg (333.3 KB, 125 views)
Reply With Quote
  #12  
Old 08-18-2011, 04:21 AM
FINSRIN FINSRIN is offline
Experienced
 
Join Date: Aug 7 2010
Posts: 134
FINSRIN is on a distinguished road
Default

Thanks for pictures. Do like the look of it. Something to ponder for the 60.

Off original topic... am wondering how tail light pannel and rear of Tbird would look if after chroming; the raised bars of squares were painted black and insides remained chrome. Opposite of normal. Have extras to chrome over Winter. Could paint them that way. Hmmm...

Thoughts - Comments ?
Bill
Reply With Quote
  #13  
Old 08-19-2011, 10:50 PM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
 
Join Date: Jan 21 2008
Posts: 11,893
YellowRose is on a distinguished road
Default Chrome Hash Marks Placement

Mary ~ mvd011244 sent an email to me. Here is what she had to say.

"Thank you so much for putting my dilemma out there and a great guy answered it great. There was another post about some of the hash marks being a different size, and holes different, I have the stud type with snap nuts, not the screw type. Does that hold true?

I haven't got them mounted yet, but they will be this week coming up. We just got the top working, now for weatherstripping, that's the big one. We replaced both exhaust manifolds and so far, so good.
Thanks again.
Mary
PS Lots of stares and thumbs up signs when we take it out. Nothing like a squarebird, yeah!!!!!!!"

Mary, hopefully the guys who own '60 Tbirds can answer your question. I do not know if the screw on type are different in size or the holes are different. I would open the trunk, take off the driver and passenger side panel covers and see if you can tell where the holes were. If you can, put your chrome pieces up against the holes and see if the holes in the chrome pieces match up with the holes in the side panels. If they do, I would say you have the right type chrome pieces. But then comes the tricky part. Drilling the holes through the paint job without messing it up. I think someone mentioned using tape over the paint to help prevent that, but I will like to see some of our really experiences people respond to this.
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

rayclark07"at"att.net (Home) 210-674-5781 (Cell) 210-875-1411
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #14  
Old 08-19-2011, 11:40 PM
jopizz's Avatar
jopizz jopizz is online now
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 4,842
jopizz is on a distinguished road
Default

The stud type hash marks have three different part numbers; C0SB-28984, C0SB-28985 and C0SB-28986. It's been awhile since I replaced them, but I believe the first five closest to the front of the car are the 28984 part number; the next two are the 28985 and the last two are the 28986. If you compare them you will see the difference in curve and stud separation. Hopefully someone will correct me if I'm incorrect. I'm going by the picture in the parts manual.
Reply With Quote
  #15  
Old 08-20-2011, 01:44 PM
tbirds8 tbirds8 is offline
Super-Experienced
 
Join Date: Nov 6 2006
Posts: 907
tbirds8 is on a distinguished road
Default

Thats right there are 3 diff ones. The fender gets rounder near the back. I read somewere that the ones with screws were mounted closer together or more towards the back. Have to see if I can find that.
Reply With Quote
  #16  
Old 08-20-2011, 10:56 PM
GTE427's Avatar
GTE427 GTE427 is offline
Super-Experienced
 
Join Date: Oct 9 2007
Posts: 596
GTE427 is on a distinguished road
Default

Locations for the screw vs stud, early vs later has already been discussed in the past. No need to look any further than this thread, compare the locations on the black bird in post #4 with the gold bird in post #6. They are different, as are other TBirds from the two periods in 1960.
__________________
Ken
1959 J Convertible
1960 J Hardtop
Reply With Quote
  #17  
Old 08-21-2011, 04:47 PM
JohnG's Avatar
JohnG JohnG is offline
John
 
Join Date: Jul 28 2003
Posts: 2,229
JohnG is on a distinguished road
Default

I had the same sort of problems with my '58 - the holes were just filled in with Bondo so I drilled them out (not as hard as I could do it from the inside).

On fastening new ones, I find the whole speednut set up to be a problem in the waiting. The stud can break off or the speednut can loosen.

A totally foolproof approach is to put some RTV on the outside around the hole, then a blob on the inside around the stud. Some masking tape to hold it in place for a few hours and you have a very sturdy fastener that does not change with vibration and can be removed if need be. The RTV also seals the hole so no moisture can get in and start a hidden rust problem.

On the subject, if you have good hash marks with broken studs, you can drill and tap them for 6-32 threaded rod (or put a bolt in and cut the head off) - they are quite salvageable. You need a drill press to set the depth so you don't drill through to the outside!

John
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:35 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.