This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 08-08-2006, 06:50 PM
jalderfer jalderfer is offline
Apprentice
 
Join Date: Jun 16 2005
Posts: 31
jalderfer is an unknown quantity at this point
Default 1960 interior

I am getting ready to order a complete new vinyl interior.
Which vendor is the best or do they all get them from the same place?
Reply With Quote
  #2  
Old 08-09-2006, 10:44 AM
Alexander's Avatar
Alexander Alexander is offline
Webmaster
 
Join Date: Oct 30 2002
Posts: 3,338
Alexander is on a distinguished road
Default RE: 1960 interior

I have not needed an interior.

I think there a few different manufacturers. My suggestion is to go the nearest vendor or go to a large auto swap meet to look at the materials yourself.

An alternative is to have a vendor send you a vinyl swatch and see it is the quality you expect.

Alexander
1959 Hardtop
1960 Golde Top
__________________
Alexander
1959 Hard Top
1960 Golde Top
Reply With Quote
  #3  
Old 08-09-2006, 09:16 PM
tmjsong1aolcom tmjsong1aolcom is offline
Experienced
 
Join Date: Mar 31 2004
Posts: 323
tmjsong1aolcom is on a distinguished road
Default RE: 1960 interior

I have a new interior in my 58. Alex has seen the interior, but has not seen the problems. It was sewn by TBHQ, and that part is first rate. I am not happy with the vinyl used. the grain is off but more importantly it is the thinest vinyl one could possible find and is prone to easy ripping if not careful during the install.

I am famaliar with Larrys but didn't go to him for the sew job.

I would check with Original auto interiors. They have a web site and can get a phone number from there. No matter who you choose make sure they send you samples of their vinyl to make sure it is of adequate quality.

Good Luck and let us know what you find

Fuz
58's&64's
Sun Prairie, Wi.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:33 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.