In a post some time back, I found a post by Alex about what lube to use in the steering box.
"Use MOTORCRAFT XG 1-C Chassis Lube instead of the original Ford Lubricant B8A-19578-A" Thanks Alex.
I removed the fill plug on my 60 HT steering box, and found that I need to fill it -- big time.
My question is this -- how do you fill the steering box through that 1/2 inch hole? Do I just stick the end of the grease gun into the hole and keep pumping? It's obvious that it's not going to "flow" through the gear box, and will overflow out the top as I try to pump grease though a small hole.
Is that just the way it is, or am I missing something here.
Thanks
"Use MOTORCRAFT XG 1-C Chassis Lube instead of the original Ford Lubricant B8A-19578-A" Thanks Alex.
I removed the fill plug on my 60 HT steering box, and found that I need to fill it -- big time.
My question is this -- how do you fill the steering box through that 1/2 inch hole? Do I just stick the end of the grease gun into the hole and keep pumping? It's obvious that it's not going to "flow" through the gear box, and will overflow out the top as I try to pump grease though a small hole.
Is that just the way it is, or am I missing something here.
Thanks
Comment