Announcement

Collapse
No announcement yet.

Radiator seal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    Radiator seal

    At some point, my 60 2 door with air must have had a shield of some type that attached to the body, vertically on both the left and right side of the radiator. Whatever it was is broken off leaving a rough edge that is attached to the body by a black vertical piece about 3/8 inch wide with screws. Does anybody know what this is and if so does any supplier carry them?
  • byersmtrco
    Super-Experienced
    • Sep 28 2004
    • 1839

    #2
    Mine has that same thing, in the similar cond as yours. I'd be curious too.

    Comment

    • Alexander
      Webmaster
      • Oct 30 2002
      • 3321

      #3
      The side radiator deflector rubber parts are reproduce. The metal parts you need to get used.
      Alexander
      1959 Hard Top
      1960 Golde Top
      sigpic

      Comment

      • bcomo
        Super-Experienced
        • Sep 23 2005
        • 1223

        #4
        I just replaced mine. They are called "Radiator Side Seal"

        Bird Nest has them for $3.95 for the pair.

        1958-1960RADIATOR SIDE SEAL New 580RSS 3.95 Pair

        Bart
        1960 Hard Top/430
        Thunderbird Registry Number 1231

        Comment

        • tbird430
          Super-Experienced
          • Jun 18 2007
          • 2648

          #5
          Does anyone know where I could find the left metal piece w/screws? Mine was missing, and I need ALL the air I can get pushing through the radiator (430cid T-Bird)!! LOL!!!
          sigpic
          The 1960 Ford Thunderbird. The WORLD'S most wanted car....

          VTCI Member#6287.

          Comment

          • Alexander
            Webmaster
            • Oct 30 2002
            • 3321

            #6
            If you cannot get it from a vendor, I see these on e-Bay often.
            Alexander
            1959 Hard Top
            1960 Golde Top
            sigpic

            Comment

            • byersmtrco
              Super-Experienced
              • Sep 28 2004
              • 1839

              #7
              Very cool info!!! I'll order a set.

              Comment

              • tbird430
                Super-Experienced
                • Jun 18 2007
                • 2648

                #8
                I have the new rubber "flaps/seals", are u saying that the METAL mounting brace(s) are available too Alexander?
                sigpic
                The 1960 Ford Thunderbird. The WORLD'S most wanted car....

                VTCI Member#6287.

                Comment

                • bcomo
                  Super-Experienced
                  • Sep 23 2005
                  • 1223

                  #9
                  Jon:

                  If you can't find them used, I can trace the left one from mine and send it to you by mail when my car gets back.

                  The things are only thin sheet metal, about 2.5" wide with some holes in it for the screws. You can make it easily, and it gets painted black.
                  Bart
                  1960 Hard Top/430
                  Thunderbird Registry Number 1231

                  Comment

                  • tbird430
                    Super-Experienced
                    • Jun 18 2007
                    • 2648

                    #10
                    I might just take u up on that, good buddy....
                    sigpic
                    The 1960 Ford Thunderbird. The WORLD'S most wanted car....

                    VTCI Member#6287.

                    Comment

                    Working...
                    😀
                    🥰
                    🤢
                    😎
                    😡
                    👍
                    👎