1966 Tbird Front Turn Signals

[Guest]

OK,

Next issue for my bird, as I'm going through the wiring, lights etc. my front turn signal lights, under the bumper were pretyy dirty, in cleaning them up, the 'sockets' in which the bulbs sit are just toast, so much so, they just broke into pieces during the clean up - however, this being a driver car, I do not want to buy all new housings etc etc. is there a way to just replace the sockets and bulb contacts inside the housing? If so, where can I buy them, I can't seem to find a repair piece or what it's called - i could be calling it by the wrong name too in looking at Macs, Bob's etc. I've attached a few pictures.

Thanks again for any and all help!

[jopizz]

I know NAPA has quite a few different lamp socket and socket inserts. They might have one that fits. I would bring the housing with you.

John

[simplyconnected]

Mac's sells this for six bucks:

BAAA-13410-A Parking Light Socket - Replacement Type - With Double Contacts - Ford & Mercury $5.95 EACH
It has all the parts you need.

[Guest]

Mac's sells this for six bucks:

BAAA-13410-A Parking Light Socket - Replacement Type - With Double Contacts - Ford & Mercury $5.95 EACH
It has all the parts you need.

That's awesome! EXACTLY what I needed, thanks a million!