Window guide moleskin

[Astrowing]

I'm starting to plan refurbishing my window guides and wanted to know what kind of adhesive ya'll used to "glue" replacement moleskin into the channel guides. I'm planning on doing weatherstripping, antirattlers, and seals at the same time. Any suggestions or pointers are welcome.

[c4clewis]

I just used contact cement and it seemed to work well. The biggest deal I found was to ensure that ALL wrinkles are out and the moleskin is smooth. If not, it will eventually catch and pull away (as I found out).

[Dakota Boy]

3M black weatherstrip adhesive is what I used.

If I recall correctly, that moleskin stuff is only needed for the rear quarter window tracks

[Astrowing]

The 3M is a great idea. I've had the rear track of the front door out previously and it does have the fuzzy stuff in it also. Pretty worn down I might say, especially on the drivers side.