sun visors

[cubbear]

i have new visors to install and there is no holes for the rods that go in both ends what do i do

[Guest]

i have new visors to install and there is no holes for the rods that go in both ends what do i do

call the vendor you bought the visors from and ask them.

[yellow98cobra]

I typed sunvisor into the search box and got this post plus others... http://squarebirds.org/vbulletin/sho...ight=sunvisors

[YellowRose]

sun visors

Eric, my sun visors had the holes for the rod in them. I did not have to cut or make holes to slip the rod into. As was said below, contact the person who sold you those and tell them they sent you a set with no hole in it to slip the rod into and see what they have to say...

[Tbird1044]

I checked my NEW visors and have the same situation. No holes. Also, disappointed to see the posts that the new visors are not staying in place and seem to drop. Let us know what you find out and how things work.
Nyles

[YellowRose]

sun visors

My sun visors were NOT store bought. Mine were made by the person who did my interior for Rose. He recovered the originals with new material, leaving the hole open to slip onto the rod. The drivers side was slightly loose enough to allow it to swing down. As I said, I fixed that by slipping a plastic straw over the rod and it has stayed in place ever since. You should contact the seller and ask him why he sent you sun visors without the holes in them to slip over the sun visor rods... Or maybe they expect you to make your own holes....

[Anders]

Mine didnīt have any holes either. But by ckecking my old ones I could see where they should be, and i put in a thin long piano wire there and located the inner tube. By pressing in my piano wire I could see how it bended and therefor see in what direction I should enlarge the hole. Having done that, I pushed my piano wire to the other side to see where it wanted to come out on the other side. Worked quite easy to be honest. I might remember wrong, but there is something in my memory that says there was a little dot where the holes should be. But my memory might play me a trick.
My only problem is that I got one visor that stays in posision and one that always want to fall down...

[YellowRose]

sun visors

Anders, do with I did... Slip a soda straw over that rod. Then slip the rod with the soda straw on it into the hole, pushing both all the way in. That is what I did and mine has not dropped down since...