Tweet
My dad have a 68 302 v8 2bbl and the acceleration pump diaphragm is leaking we see 4 bolts that we have to remove but someone told us something about a spring, what exactly do we have to do to replace the diaphragm?Anyone please.. Thanks
-
-
Normally, when you get a carburetor rebuild kit, a new pump diaphragm come in the kit. The pump isn't hard, and all kits come with full instructions and an exploded view.
This kit is for a '68 Fairlane 302:
STANDARD MOTOR PRODUCTS Part #586 {#C9TZ9A586A, D0AZ9A586A, D1AZ9A586A} Hygrade Jiffy Kit for FORD #D4PE-SA
Carburetor Kit 2 BBL,FORD EQPD
Carburetor Kit FORD EQPD
Carburetor Kit 2 BBL,FORD EQPD - INCLUDE TAXI, POLICE
I know summitracing.com has it and so do others. - DaveLast edited by simplyconnected; May 2, 2017, 10:24 PM.Member, Sons of the American Revolution
CLICK HERE to see my custom hydraulic roller 390 FE build.
"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
From: Royal Oak, Michigan -
Actually the diaphram is more to the center of the photo. The upper left corner is a gasket.
ForestComment
Comment