Retro-Fit Hydraulic Roller Cam. Excellent HO replacement type cam with noticeable torque and HP increases throughout the RPM range. Works with stock mass-air type injection systems.
Advertised Duration (Int/Exh): 262/270
Duration @ .050 (Int/Exh): 211/219
Gross Valve Lift (Int/Exh): .559/.559
LSA/ICL: 112/106
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 1600-5600
Advertised Duration (Int/Exh): 262/270
Duration @ .050 (Int/Exh): 211/219
Gross Valve Lift (Int/Exh): .559/.559
LSA/ICL: 112/106
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 1600-5600
This is the lowest, or "most stock" of the four that Lunati makes for this engine. After tweaking my ignition as much as I can and tuning my EFI unit I have an engine that idles good and has plenty of power.
That is to say it doesn't idle great. I'm used to old Ford V8s running extremely smooth. So smooth you can tell if they are idling, and accelerating like a turbine.
Is what I have what I should be expecting from this cam?
Comment