The previous owner removed the power window regulators and motors and did not mark them as to left or right. I think I can determine that okay but need help in figuring how they mount to the door. I looked at the shop manual and that's really no help. Does any one have a picture of a mounted window set up without the door card in place? Any tips are helpful. I'm rewiring and need to get the motors in position to determine wire length. Thanks......
Announcement
Collapse
No announcement yet.
Power Window mounting
Collapse
X
-
Tags: None
-
Don't know if these will help or not, but here are some pics of a door with the p/w regulator installed.
Nyles -
Power window
Nyles,
Thank you. On the far right side of the regulator picture is a lower mount flange (I think). Am I correct that this bolts to the lower window stop - which the PO also removed without marking.
ChrisComment
Comment