This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
Prev Previous Post   Next Post Next
Old 08-31-2009, 02:57 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
Join Date: May 26 2009
Posts: 7,525
simplyconnected is on a distinguished road
Default Timing Chain and Degreeing your Engine

Y-Blocks were the lifeblood of the Little Birds. They made THE engine sound, that all the others tried to imitate, but never could.

The soul of all engines comes not from piston size or stroke, but from the cam, and cam timing. In other words, if you want to unleash those hidden ponies from your engine, the very first place to look is at your cam timing.

Cam timing depends on a GOOD timing chain. Did you ever give 'er gas, and feel that hesitation, especially in an older engine? 'Caused by a sloppy timing chain. They aren't all created equal and OEM chains stretch miserably after about 50k miles. True roller chain sets are the best replacement:

They look like doubled bicycle chain, and last > three times longer than conventional chains.

Cam timing determines your torque curve. Racers retard their timing for better 'high rpm' torque, because most of their driving involves 4-5,000 rpm. A stretched chain can retard cam timing by about 2*. The distributor is driven from the end of your cam, so a sloppy chain further aggravates starts from a light, and causes erratic valve and spark timing.

If you have an older engine and want to bring back that new engine feel, change your timing chain. Another opportunity is if you are already changing your water pump. Your timing chain is right behind the water pump. Most guys need a few hours, $150, and their driveway (on a nice day) or garage.

When installing a new chain, ALWAYS degree the engine timing. It's free and takes about an hour or less. Why degree? I mentioned cam timing and slop, but did you know some engines are DE-tuned from the factory by retarding the cam? Yep! That's why the 460 was such a dog.

Manufacturing tolerances stack up if you consider the keyway broached in the crank, the crank sprocket, the cam sprocket, and the cam. Four strikes before you install a new timing set.

We can adjust cam timing by using an offset cam key. Mr. Gasket sells them in 2*, 4*, and 6* increments. A better deal is to buy a timing set with seven slots broached in the crank sprocket, sold by many companies including Ford Racing. You just slide the sprocket on using the keyway you choose; -6*, -4*, -2*, zero, +2*, +4*, +6*.

Click HERE to learn how to degree your engine. This is a PDF file for you to print, so Acrobat Reader is required. If you don't have it, go to and download it for free. - Dave Dare
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 10:21 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by