If this is your first visit, be sure to
check out the FAQ by clicking the
link. You must register
before you can post: click the register link to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The base should AJ-C on it. Looks like it's right. The hook has metal plates spot welded to the hook end and it snaps onto the jack which has a round hole above a square hole on the side with the lever.
I missed it. $28 is a super deal. I was willing to pay more. I just need a couple of parts. I am going to attempt to contact the winner and see if he is willing to part with them. Possibly a trade.
J Bird
Did you receive an email from me? I am looking for just the "J" hook that catches the bumper. I would be willing to purchase it from you or trade. I currently have one that is similar but is much shorter.
Since you asked "what else I needed" I also have been searching for the rear garnish rail moldings for a convertible(58-59). Any chance you have them?
Thanks
No. Try davidXrhyner.com X=@ and I can send you a picture of the hook.
I am looking for just the
>"J" hook that catches the bumper. I would be willing to
>purchase it from you or trade. I currently have one that is
>similar but is much shorter.
>
>Since you asked "what else I needed" I also have been
>searching for the rear garnish rail moldings for a
>convertible(58-59). Any chance you have them?
>Thanks
My 60 Bird had the base and the j hook. I bought the upright for it on E-bay, but it was different and wouldn't go into the base whick I beleve is theright base. It worked with the j-hook, but I am still looking for the correct. upright part of the jack and the lug wrench.:'(
Comment