I have found the casting number on the passenger front side of the engine in my 60 Thunderbird hard top but it does not match any of the earlier posts for the 58,59,or 60 models.My number is C1AE6015C , with the 6 possibly being an 8. Above this number is 1E25:3 .Can anyone please decode this for me? Thanks Monty and tarp3 for the earlier help. Randy
Announcement
Collapse
No announcement yet.
Engine casting number
Collapse
X
-
RE: Engine casting number
C1 denotes that this engine was made in 1961. It may be a 390. I will look up the number when I get home from vacation next week to see what you have.
Don't worry about authenticity. All FE engines look pretty much alike. You can easily make it look like the origianl 352.
Alexander
1959 Hardtop
1960 Golde Top
Alexander
1959 Hard Top
1960 Golde Top
sigpic -
RE: Engine casting number
I looked in up in Steve Christ's book. C1AE-C is a 390cid/4.05 inch bore passenger car or light duty truck engine with hydraulic lifters.
6010 is the basic part number for all finished engine blocks.
If you post casting numbers of the heads, I can identify them also.
Alexander
1959 Hardtop
1960 Golde Top
Alexander
1959 Hard Top
1960 Golde Top
sigpicComment
-
RE: Engine casting number
Could your "6" be a "G" if so Steve Christ's book would list it as either a 61 or 62 352cu" or a 61 or 62 390cu"...gets confusing. I don't know if this book is 100% accurate. I think that the best place to get this sort information is from a forum that really knows FE engines. Try http://www.network54.com/Hide/Forum/74182
Sign up and you can get a wealth of FE information.
Steve
60HT
Cedar Rapids, Iowa
390, Mild Cam, Headers, 3.70 rear, 2-1/2" Exhaust, Edelbrok Performer RPM Intake, Holley Street Avenger 670 Carburetor, One Wire Alt, Petronix Ignition. She's All Go and No Show.Comment
-
RE: Engine casting number
I think most of the members of that FE forum have moved to their new home at http://fomoco.com/ford-forum-FE .
I know that some on the FE forum have called into question the accuracy of some of the casting information in Steve Christ's book. There is a newer edition of the "How to Rebuild your Big Block Ford Engine" which I do not have. I wonder if some of the casting information is revised. I think some of the information has been called into question because some known original engines did not match Steve Christ's listed numbers. I do not think that Ford has released any printed information on their casting numbers.
Alexander
1959 Hardtop
1960 Golde Top
Alexander
1959 Hard Top
1960 Golde Top
sigpicComment
-
RE: Engine casting number
I have an old one also, copyright 1983 I can not even find my block number in it and I know that it is a 1961 390. As to the FE Forum there are still plenty of folks on the Network 54 Forum.
Steve
1960 HT
Cedar Rapids, Iowa
390, Mild Cam, Headers, 3.70 rear, 2-1/2" Exhaust, Edelbrok Performer RPM Intake, Holley Street Avenger 670 Carburetor, One Wire Alt, Petronix Ignition. She's All Go and No Show.Comment
Comment