Tweet
There are 2 ports on one end the end of the can, one in the center, the other off set. Which port takes the hose from the engine ? (vacuum in)
-
-
If I'm not mistaken one port is larger than the other. The larger port is usually the intake from the manifold. If they are both the same size connect the center to the intake.
JohnJohn Pizzi - Squarebirds Administrator
Thunderbird Registry #36223
jopizz@squarebirds.org 856-779-9695
https://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm -
Vacuum can
John,
They measure the same, I will connect the center port to the manifold.
Thank you,
BillComment
Comment