Ignition Lock Cylinder removal

[SirBB]

Hi guys, I can't figure out how to remove the ignition lock cylinder on my 60. I found a few posts mentioning a pin that needs to be pushed in, but I don't know what pin. I saw the post with a link to a Falcon site, but the link is no longer valid. Could somebody post instructions preferably with some pictures. Once I figure it out I will be pappy to wright it up so you can add it to the technical library.

Thanks

[jopizz]

You need to remove the ignition switch from the instrument panel to access the pin. You can just barely see it between the spring in the picture. You need to push the pin in and turn the key to the right. It should pop out.

John

[Hogan]

The following YouTube video may help.

https://m.youtube.com/watch?v=zwzPJ-UC0D4

[SirBB]

Thanks, that's a huge help.