Larry Jones sent me an email requesting help with his '62 Convertible top. I hope someone can help him. Here is what he had to say.
"In need of some electrical advice badly. I am at my wits in. I own a 62 convertible. In the last two weeks I was able to raise my lid with no problem but was hestiate to bring up the top. Took it to a electrical shop and they had to apply power to the up and down switch to raise the top. They indicate there was no power to the switch whatsoever. Now I removed the plug myself and the plug has power with the Acc on. I tested the plug which I disconnected from the Top control safety relay just the plug and have power to the plug. Now as far as the relay with the 3 prongs itself putting a ground lead attached to a screw and touching the positive led with a static check it shows infinite. Shouldnt it register 000 ohms meaning on the terminal for a good static check at that relay. Thank you frustrated Larry."
"In need of some electrical advice badly. I am at my wits in. I own a 62 convertible. In the last two weeks I was able to raise my lid with no problem but was hestiate to bring up the top. Took it to a electrical shop and they had to apply power to the up and down switch to raise the top. They indicate there was no power to the switch whatsoever. Now I removed the plug myself and the plug has power with the Acc on. I tested the plug which I disconnected from the Top control safety relay just the plug and have power to the plug. Now as far as the relay with the 3 prongs itself putting a ground lead attached to a screw and touching the positive led with a static check it shows infinite. Shouldnt it register 000 ohms meaning on the terminal for a good static check at that relay. Thank you frustrated Larry."
Comment