just finished changing out the passenger side exhaust manifold due to it being badly cracked. that went rather smooth, until I tried to starting it. seemed to take a long time to finally crank.
next day would not start, now it cranks, gets fuel, but no spark. I did swap out a older flame thrower coil for a new one. old one seemed to read 6-7ohms which seemed high? still no go. I do have the petronix ignitor.
would(could) the ignition switch itself cause no spark? I vaguely remember having a similar issue with the original one 15plus years ago. also coincidently the dome light stopped working a month ago too!
thanks for any insight!!
next day would not start, now it cranks, gets fuel, but no spark. I did swap out a older flame thrower coil for a new one. old one seemed to read 6-7ohms which seemed high? still no go. I do have the petronix ignitor.
would(could) the ignition switch itself cause no spark? I vaguely remember having a similar issue with the original one 15plus years ago. also coincidently the dome light stopped working a month ago too!
thanks for any insight!!
Comment