Hey ya'll need a little help here can anybody tell me the gear diameter size in a 67 rear I have been told 9 in but also have been told 9 3/8 did they use both sizes ? And is there any aftermarket gear sets available for the 9 3/8 ?
Announcement
Collapse
No announcement yet.
New gears
Collapse
X
-
They did use both sizes in '67. Does your rear have the ID plate on it. If it does look for the letters WDC or WDT. WDC is a 9" and WDT is 9 3/8.
JohnAttached FilesJohn Pizzi - Squarebirds Administrator
Thunderbird Registry #36223
jopizz@squarebirds.org 856-779-9695
https://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm -
New gears
JT, before you pull it, try cleaning that tag with different types of cleaning solvent. If you can clean it enough to see the WDC or WDT that will tell you which you have in there... Unless someone changed things out and just left the tag there...
Ray Clark - Squarebirds Administrator
The Terminator..... VTCI #11178 ITC #6000 Yellow Mustang Registry (YMR) #12188
Contact me via Private Message for my email address, or Call (Cell) 210-875-1411
https://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Faye's Ovarian Cancer Memorial Website.
https://faye.rayclark.info/index.htmlComment
-
You're welcome. Glad I could help.
JohnJohn Pizzi - Squarebirds Administrator
Thunderbird Registry #36223
jopizz@squarebirds.org 856-779-9695
https://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htmComment
Comment