Tweet
I picked up a hunter P611 with DSP300 heads about year ago cheap (using it with plates on my 4 post). These heads connect to the edges of rims.
The older hunter heads have to be rotated 360 to level them out before doing a 4 wheel alignment. It appears they may not fit even with skirts removed. Anyone confirm that this type of head fits.
With radials, shooting for 0-1/16 toe, as much caster as I can get, correct? Also, what camber, shop manual claims a hair positive, that still apply or can I dial in the usual hair of neg camber?
The older hunter heads have to be rotated 360 to level them out before doing a 4 wheel alignment. It appears they may not fit even with skirts removed. Anyone confirm that this type of head fits.
With radials, shooting for 0-1/16 toe, as much caster as I can get, correct? Also, what camber, shop manual claims a hair positive, that still apply or can I dial in the usual hair of neg camber?