This is brand new roller set from Crane, only 300 miles on them. I had to reset the intake and so a new adjustment on the valves. Only four of the 16 lifters act "normal", with the internal return spring holding the lifter to maximum length. I primed the oil pump for several minutes and no change. Lots of oil pumping through the rocker sets.
This is the second set of lifters that has collapsed. Pushrods are custom length, solid tip, my originals were hollow. I have assumed that the lifters receive oil from the block, through the sides, so the solid tips would not be a problem. Am I wrong?
This is the second set of lifters that has collapsed. Pushrods are custom length, solid tip, my originals were hollow. I have assumed that the lifters receive oil from the block, through the sides, so the solid tips would not be a problem. Am I wrong?
Comment