The hydraulic roller lifter cam I installed changed the power range of my 390 from 1800-2000 rpm to 2200-2400 rpm. I purchased a Boss Hog torque converter from Summit to match the higher stall speed. Ever since I received it there's been the lingering suspicion that the new converter is identical to the stock converter.
My trans guy told me that the new converter would have a smaller diameter, so I was surprised that the Boss converter appeared to look the same as the stock item. I called Summit, who referred me to Boss, who assured me that they shipped the correct item. I guessed that the difference must be in the internals. But still.....
In the photo, the Boss converter is on the left, the original stock converter is on the right. Any opinions?
Thanks and Cheers,
Richard
My trans guy told me that the new converter would have a smaller diameter, so I was surprised that the Boss converter appeared to look the same as the stock item. I called Summit, who referred me to Boss, who assured me that they shipped the correct item. I guessed that the difference must be in the internals. But still.....
In the photo, the Boss converter is on the left, the original stock converter is on the right. Any opinions?
Thanks and Cheers,
Richard
Comment