Need Help (Again!) re Pulley P/Ns!!

[texastomeh]

Hopefully you guys won't get too tired of this "CHEAVY" weenie asking for help!!

I am adding A/C to my '63 390 FE Hardtop with P/S and need P/Ns for:
(1) the three groove crankshaft pulley
(2) the three groove water pump pulley
(3) the A/C idler pulley/assembly

Appreciate any and all help.

texastomeh

[Alexander]

(1) the three groove crankshaft pulley C1AZ-6A312-C. This is the two pulley outer sleeve. The single pulley inner sleeve C3AZ-6312-E is identical on A/C and non-A/C cars.

(2) the three groove water pump pulley C1AE-8509-B.

(3) the A/C idler pulley/assembly C8OZ-2884-B. I assume you mean the clutch fan pulley on the A/C compressor

[texastomeh]

THANX Alexander!!

NOW I know what to look for at swap meets and on eBay!

texastomeh

[texastomeh]

Alexander -

Not much luck finding the C1AZ-6A312-C two groove crank outer pulley , but have found a THREE groove #C4AE-6316-A (6 1/2" diameter) off of a '64 GALAXIE 500 390 with A/C and P/S.

Will the C4AE-6316-A work on my '63 T'Bird?

thanx in advance!

texastomeh

[Alexander]

Not sure. It may interchange for the two piece. Is it expensive?

[texastomeh]

It is currently listed on Ebay (item #180196441641) under "390 Pulley" search. Opening bid is $9.99 (no bids yet). S&H should run $10-$15.

thanx as always!!

texastomeh

[Alexander]

Hmm, that looks like it should work. It may be two pieces. Ask the seller.

[texastomeh]

Alexander-

He replied:"It is a 2 piece, single with a double pulley".

Sounds like what I need?

thanx,

texastomeh

[Alexander]

It looks like it wil work for you car.

[texastomeh]

Pulley arrived today.

Perfect fit!!

Thanx for yor help Alexander!!

texastomeh