Hi
does anyone know the end compression thickness of the "STOCK orig equipment as it came with the car Head Gasket." I am getting ready to install 3 X 2 carb / intake and wanted to bump the compression up a notch. Fpr every .020" thousands of space from stock either way will give you about 2.5 cc more or less change in combustion area. toying with the idea of copper gaskets as i can buy them at a particular thickness matching up the intake to compensate for the change in the head location. Just need a ref. point for my math.
thanks
mark
does anyone know the end compression thickness of the "STOCK orig equipment as it came with the car Head Gasket." I am getting ready to install 3 X 2 carb / intake and wanted to bump the compression up a notch. Fpr every .020" thousands of space from stock either way will give you about 2.5 cc more or less change in combustion area. toying with the idea of copper gaskets as i can buy them at a particular thickness matching up the intake to compensate for the change in the head location. Just need a ref. point for my math.
thanks
mark
Comment