This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 09-04-2018, 04:38 PM
Tbird1044 Tbird1044 is offline
Super-Experienced
 
Join Date: Jul 31 2012
Posts: 1,189
Tbird1044 is on a distinguished road
Default How to build a reliable, powerful Ford Y-block

Found this article and thought some might find it interesting:
https://www.msn.com/en-us/autos/enth...68k?li=BBnb4R5
Nyles
Reply With Quote
  #2  
Old 09-04-2018, 05:47 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,525
simplyconnected is on a distinguished road
Default

The book is written by two of THE foremost authorities on Y-Block engines. They have dedicated themselves to this engine because they are passionate about it as evidenced in the following quote:

"Forget the 90-degree Fairlane V-8 known as the small-block Ford, and both the FE and 385-series big-blocks a lot of enthusiasts like to install in classic Ford trucks. If you're building a vintage Ford truck, the Y-block is the only mill that will do from an emotional standpoint."

Funny but here in Detroit, Hot Rodders claim, 'it's not a real hot rod unless it has a flathead Ford engine.'

There's an old saying that goes, 'There's no replacement for displacement." Nyles, you should know this well.

I have a Y-Block in our '59 Galaxie because it came with the car. It's a nice engine but c'mon... 292 cubic inches is way underpowered in a full size Fordor. Everything you can do with a Y, you can also do with an FE only cheaper.

The 'Y' was Ford's first attempt at building an overhead valve engine. This was one step up from the Ford flathead. The 'Y' came with many design flaws, most (but not all) of which were corrected in the FE. Notice, none of the Squarebirds had a 'Y'. Also notice, NONE of the Squarebird builders reverted to the 'Y' as it was a good 'first attempt' but far too small for a personal luxury car.

I'm sure I'll get feedback about this post but it is all true. I will only go through and name the 'Y-Block' faults if asked. I spent a lot of time and effort correcting them for my build. - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 12:31 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.