vacuum lines part 2

[tarps3]

For some reason, the following post won't show up on my previous thread, so I'll post it separately and see if that works. Please refer to the diagram in the previous thread for some background info.
These vacuum lines are like voodoo or something - ha.

I think I have everything tracked down and connected correctly.
Except for one thing.
The diagram showing the back of the washer control switch indicates a hose labeled "vacuum hose from engine". The only one I have from the engine (fuel pump) goes in the firewall to the wiper motor.
Where do I connect the hose from the washer switch to the engine?
I assume there should be a "T" in the main hose from the fuel pump so it will serve both the wiper motor and the washer switch, but I'm not sure.
Can you clarify this for me before I cut that hose for a "T" install?
thanks!
Casey

[Alexander]

RE: vacuum lines part 2

This is the original vee-shaped tee on the passenger side: http://www.squarebirds.org/Windshiel...Vacuum-Tee.jpg

The vacuum hose from the tee enters the firewall here and goes to the windshield washer switch on the driver's side dogleg.

http://www.squarebirds.org/Windshield%20Washer/Washer-Vacuum-Firewall-Entrance.jpg

Alexander
1959 Hardtop
1960 Golde Top

[tarps3]

RE: vacuum lines part 2

Alexander,
thank you VERY much for the photos that you posted.
I think that answers the last of my questions.

I really appreciate your assistance over the last few days.
best regards,
Casey