"Tweety Bird" Gets Disc Brakes & More
Thanks for the information, Dave! I will wash down my driveway when we are finished. I wish I had caught you home yesterday. You probably would have been able to give me the right information I needed to find that brake hose. With the information you just provided, I should be able to get the right one at O'Reilly's, which is only a few blocks away from me, as is Autozone, but theirs must be gold plated! I am going to Napa, which has it cheaper but is further away.
Yes, I think Rich did a nice job bending the tubing, which is really easy to do with the cunifer EZ bend brake line.
As for the brake light switch he did not put it on yet, but will of course. He also has to splice in some new wiring to it and put on the two new bullet connectors I got. It will be on the passenger side of the MC.
I will tell him what you said about putting some engine paint on the calipers and hubs.
I called NAPA and gave them that BH36646 part number and it did not come up. So he looked it up as 36646 and they have two of them in stock. So I will go get one. And I just did! It cost $9.69 and $10.68 with tax. It looks exactly like the one we took off. I looked at that end where it was leaking, and I cannot see any difference between the two of them. But the one we had on her was leaking bad there. We will see what this one does, hopefully, next Friday.
Thanks for the information, Dave! I will wash down my driveway when we are finished. I wish I had caught you home yesterday. You probably would have been able to give me the right information I needed to find that brake hose. With the information you just provided, I should be able to get the right one at O'Reilly's, which is only a few blocks away from me, as is Autozone, but theirs must be gold plated! I am going to Napa, which has it cheaper but is further away.
Yes, I think Rich did a nice job bending the tubing, which is really easy to do with the cunifer EZ bend brake line.
As for the brake light switch he did not put it on yet, but will of course. He also has to splice in some new wiring to it and put on the two new bullet connectors I got. It will be on the passenger side of the MC.
I will tell him what you said about putting some engine paint on the calipers and hubs.
I called NAPA and gave them that BH36646 part number and it did not come up. So he looked it up as 36646 and they have two of them in stock. So I will go get one. And I just did! It cost $9.69 and $10.68 with tax. It looks exactly like the one we took off. I looked at that end where it was leaking, and I cannot see any difference between the two of them. But the one we had on her was leaking bad there. We will see what this one does, hopefully, next Friday.
Comment