This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
Old 09-09-2014, 04:44 PM
60 birdman 60 birdman is offline
Join Date: Aug 25 2014
Posts: 5
60 birdman is on a distinguished road
Default Rack and pinion steering

Does anyone know of a manufacturer that makes a rack and pinion conversion for a 1960 Squarebird? I have searched most of the on-line people to no avail. Any help would be appreciated.

Reply With Quote
Old 09-10-2014, 10:14 AM
YellowRose's Avatar
YellowRose YellowRose is offline
Super-Experienced and a HELLOFA nice guy
Join Date: Jan 21 2008
Posts: 12,140
YellowRose is on a distinguished road
Default Rack and pinion steering

I do not know of any company that is making a rack and pinion set up for the Squarebird.

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

rayclark07"at" (Home) 210-674-5781 (Cell) 210-875-1411
Reply With Quote
Old 09-10-2014, 01:54 PM
Tbird1044 Tbird1044 is offline
Join Date: Jul 31 2012
Posts: 1,083
Tbird1044 is on a distinguished road

I have heard some talk about the rack and pinon setups not holding up due to the weight and loads of the TBird. Does anyone have any prior experience with this?
Reply With Quote
Old 09-10-2014, 02:31 PM
roger59tb roger59tb is offline
Join Date: Aug 10 2014
Posts: 49
roger59tb is on a distinguished road
Default Nyles:

You can reach me at or at It was good talking to you.
Reply With Quote
Old 09-10-2014, 03:36 PM
Rock&Roll Firebird's Avatar
Rock&Roll Firebird Rock&Roll Firebird is offline
Join Date: Jun 20 2012
Posts: 327
Rock&Roll Firebird is on a distinguished road

Not sure if they do the Squarebird solutions but you may wanna check these:

Reply With Quote
Old 09-10-2014, 05:31 PM
60 birdman 60 birdman is offline
Join Date: Aug 25 2014
Posts: 5
60 birdman is on a distinguished road
Default Rack and pinion for squarebird

Thanks for the info. I will do some checking with the company's listed.
Reply With Quote
Old 09-10-2014, 08:36 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
Join Date: May 26 2009
Posts: 7,287
simplyconnected is on a distinguished road

Mbazzone added power rack and pinion to his Squarebird. Fabrication skills are required but if you can lay out two plates that bolt onto your original steering gear and idler arm frame holes, and do a little welding, all the other components can be purchased. Check out this picture
from his post #13

See the plates with three new bolts, bolted to the frame, on the far LH edge of the picture?

These 1/4" plates take less space than the original steering setup, which offers more room for exhaust pipes and yes, catalytic converters, if used.

This is clearly a used/rebuilt rack and pinion gear, available at most auto parts stores all across America, for under a hundred bucks. Does this gear look familiar?

This is a photo.
It fits a Chevy Corsica (A-1 CADONE Part # 22109), and it is VERY reliable and perfect for this application. Just about any modern PS pump will power it, like a pump from a Mustang. The hydraulic fittings are standard "AN" fittings and the steering shaft fits (AFCO, Borgeson, Sweet or Unisteer) 'U'-joints. Tie rods can be purchased from for under $30/each:
- Dave
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 10:53 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by