This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 10-28-2011, 11:50 AM
yoauto yoauto is offline
Newbie
 
Join Date: Oct 24 2011
Posts: 3
yoauto is on a distinguished road
Default 430 Removal

I need to replace exhaust manifolds & gaskets on 1959. I'm wondering what is the best way to go at it. Tear motor down in car or remove. I can see there is already one bolt broke off in the right side head and I am expecting before I get the manifolds off there will be others. Also the manual I have says to pull engine and trans as unit. I want to take this time and detail and paint . Any advice will be appreciated. Thanks Clyde
Reply With Quote
  #2  
Old 10-28-2011, 12:01 PM
Joe Johnston Joe Johnston is offline
Super-Experienced
 
Join Date: Dec 23 2008
Posts: 665
Joe Johnston is on a distinguished road
Default

It depends on the condition of the eng and trans and how long since either were rebuilt? Biggest factor is the condition of your checkbook??

You can make minimal repairs or rebuild and repaint everything - this is a project that only you can determine the amount of effort and money you want to put in to it and the goals you want to achieve.
Reply With Quote
  #3  
Old 10-28-2011, 12:36 PM
tp tbird's Avatar
tp tbird tp tbird is offline
Experienced
 
Join Date: Dec 17 2007
Posts: 188
tp tbird is on a distinguished road
Default 430 removal

I had mine in and out three times due to a oil leak ,one time in and out with the trans and the other two time just the engine,you can do it either way.If you have A/C the box is close to the bell-housing at the top ,the bolt on the top of the bell-housing is hard to get out if you go with just engine removal,but can be done.If you are just working on the heads to repair broken bolts you can take them off in for RR.You can heat and use penetrating oil to loosen the bolts ,if I remember right it is the ones on the heads that break most of the time.If your motor needs any other work like lower end take it out same with trans,then you can detail the engine bay at that time.It depends on your pockets,how deep they are.
Reply With Quote
  #4  
Old 10-28-2011, 07:32 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,130
simplyconnected is on a distinguished road
Default

Generally speaking, it's always best to paint the engine bay with no engine. That's how it was done at the factory. Also, exhaust manifold bolts on practically every engine are the hardest to remove because the heads get orange-hot which draws carbon out of the steel and makes them rust to a new size. I suggest you get stainless steel replacement bolts because they don't need to be super strong and high heat won't affect them.

You never mentioned anything about rebuilding your engine. How many miles are on it? tp bird and Joe Johnston are right about the ease of working on the engine while it is out. Again, that's how they did it at the factory. The engine and trans were together and dropped in as one unit with one guy guiding under the car and the other running the hoist. One car per minute. Hmmm... Ford paid under a BUCK for each engine dropped (A/C or not)! - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:59 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.